freemanualguide

Ground Control Coil Over Conversion Install.

Raise and properly support back of car. I used a long metal bar that I
had which reached across from one of the lower A-arms to the other and
jacked up in the middle. I then put jack stands under the rear jacking
points using jacking pucks.

Remove wheels On the passenger’s side
of the car you will need to remove the brake pipe bracket so that the
suspension can be lowered. It is attached by 2 10mm nuts. Support the
lower control arm using a jack and remove the lower shock mounting bolt
(21mm). Lower the jack and put it under the cradle. Remove the 2 cradle
to body mounting bolts and washers. The Front is 24mm and the rear is
21mm. Download free Ground Control Coil Over Conversion Install.pdf here